Product details

Build a repeatable hand movement

For rally and drift driving, a useful handbrake position is one you can find without looking away from the track. Start with your normal seated position and choose a location that lets your arm move comfortably between the wheel and lever. A firm mounting surface matters: movement in a bracket can make a consistent hand action harder to repeat.

Choose the input style for your simulator

Analogue mode offers a graduated input, while digital mode provides an on/off command. Check the handbrake options in your simulator before configuring it. Where an analogue axis is supported, watch the input display while testing a few gentle pulls. For a digital assignment, confirm that the action releases properly as well as activating.

Set the feel before chasing lap times

Use the adjustable spring and elastomer system to choose the resistance. Begin with a comfortable setup and spend time on a familiar section of track before changing it again. Change one setting at a time; this makes it easier to identify whether a difference comes from the hardware setup or your driving. The aim is a controlled action you can reproduce, rather than the greatest possible resistance.

Plan a complete control layout

If you also use a separate shifter, leave enough space for both movements. Check that the lever does not interfere with your wheel, seat or shifter at either end of its travel. Route cables away from moving parts and leave appropriate slack so that adjusting your driving position does not pull on a connector.